Tempest® 4441 High Velocity Gas Burner
The Tempest® High Velocity Burner is one of the world's most widely used in the thermal process industry. Contact Fives North American Combustion today to hear more about the burner that is replacing and outperforming the competition.
- Heat Treat
- Chemical Plants
- Heat Treat and Forge Furnaces
- Thermal Oxidizers
- Periodic and Tunnel Kilns
- Indirect Rotary Calciners
- Ladle/Tundish Preheaters and Dryers
- Aluminum Molten Furnaces
Superior Recirculation Capabilities
High velocity jet supplies superior re-circulation allowing for tight temperature uniformity over a wide variety of applications up to 3000°F (1650°C). Integral air and gas orifice plates and measuring taps simplify installation.
Tempest® burners properly located on the furnace can achieve the tightest uniformity by industry standards such as AMS 2750E.
Widest Operating Capabilities
- Slotted tile available for superior narrow lane firing and tightest temperature uniformity
- Industry leading operating range from 30% excess fuel, up to 6000% excess air
- Preheated combustion air versions available for up to 800°F (425°C)
- StepFireTM (pulse firing) control or pressure balanced ratio control
- Direct spark ignition
- BSP or NPT threaded gas/air connections
- Sturdy cast construction
- All sizes suitable for use with ionization/flame rod (standard) or UV detector (optional)
Low NOx Emissions
Emissions are typically less than 60 ppm (123mg/Nm3) in a 2000°F (1093°C) applications.
Do you need lower emissions? View the Tempest®4441DMC.
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here