Pillard RotaFlam® is a leading rotary kiln burner for non ferrous minerals pyroprocessing and iron ore pelletization industries.
Thanks to its patented principle, the Pillard RotaFlam® perfectly matches the combustion specific requirements of each unique process.
For calcinations and reduction processes, such as quicklime, dolomite, pulp & paper lime recovery, expanded clay, ferronickel, magnetite, chromium oxide, titanium oxide, lithium, iron ore, etc.
Proven technology for non-cement application
For more than 20 years, the Pillard RotaFlam® has been successfully used in numerous applications worldwide using rotary kilns for calcinations and reduction processes, such as quicklime, dolomite, pulp and paper lime recovery, expanded clay, ferronickel, magnetite, chromium oxide, titanium oxide, lithium, iron ore, etc.
High flame stability
The central flame stabilizing system induces recirculation of core eddies which guarantee perfect flame stability of flame root even at cold start and low secondary air temperatures.
Wide range of flame shaping possibilities
Burner tip's cross section area can be adjusted independently from each others, during burner operation allowing to fine tune the flame setting to each unique process conditions.
Reduced primary air volume
The high combustion efficiency of Pillard RotaFlam® makes it possible to reduce the primary air volume to improve the thermal efficiency of the kiln, while ensuring lower residual CO from the combustion process.
- From 5 to 180 MW
- From 6 to 10% primary air flow
- From 150 to 200 mbar primary air pressure
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here