Pillard NeutriNOx® is the logical complement to a modern Pillard NovaFlam® or Pillard RotaFlam® kiln burner with a view to reducing further the NOx emissions generated in rotary kilns during the combustion process.
Cement kilns with preheaters/precalciners
Lime kilns with preheaters
Using "Low NOx" burners in rotary kilns is in most cases not sufficient to reach the ever stringent NOx emission limits imposed to the cement and minerals processing industries.
The system works by injecting trough patented atomizers of Pillard trademark a urea or ammonia based solution into a very specific temperature zone (between 850°C to 1,100°C) to reduce NO and NO2 (referred to as NOx).
The Pillard NeutriNOx system is tailor engineered to each specific kiln type thanks to the use of in-house CFD modeling in order to locate the right injection "spot" with excellent accuracy. The Pillard NeutriNOx system has been applied with success in cement and lime industries.
Patented atomizing guns
Pillard NeutriNOx’ atomizing guns provide optimum reagent dispersion in order to efficiently mix and disperse within the kiln gas stream.
Based on nearly a century of expertise of combustion and process experts, with the help of CFD modeling, Pillard NeutriNOx helps end users tackle their NOx emissions while maintaining high kiln availability.
High efficiency of NOx reduction
Using lowest reagent consumption, Pillard NeutriNOx permits to minimize the operational cost associated with the use of SNCR system.
- 5,000 tpd cement plant in Vietnam > 60% NOx reduction
- 2,500 tpd cement plant in Italy > 60% NOx reduction
- 400 tpd lime plant in Chile > 60% NOx reduction
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here